电视产品可持续包装设计规范（节选） - 海信视像

电视产品可持续包装设计规范（节选） Sustainable Packaging Design Guindlines for Television Products （Excerpt） 1可持续包装设计原则Sustainable Packaging Design Principles 可持续包装设计原则基于生命周期思想，在包装设计和开发过程中考虑整个生命周期中的重要影响，实现包装的整体环境负面影响最小化的目标，识别包装的重要环境影响，并规范化或量化，平衡环境贡献与功能等其他贡献。可持续包装设计从包装的环境属性、资源属性、能源属性和功能属性四个维度展开，遵循四低原则： The principles of sustainable packaging design are based on the concept of life cycle, considering significant impacts throughout the entire life cycle during the packaging design and development process. The goal is to minimize the overall environmental negative impact of packaging, identify the key environmental impacts of packaging, and standardize or quantify them, balancing the environmental contributions with other contributions such as functionality. Sustainable packaging design is carried out in the four directions: environmental attributes, resource attributes, energy attributes, and functional attributes, adhering to the the following minimum principles: 1) 包装的环境影响低，包装原材料毒性低；The environmental impact of packaging is low, and the toxicity of packaging raw materials is low. 2) 包装的资源消耗低，采用可再生材料、回收材料；优化包装结构设计方案，降低材料用量；采用易回收设计，促进包装废弃后的回收再利用；The consumption of resource by packaging is low, utilizing renewable materials and recycled materials, optimizing the packaging structural design to reduce the amount of materials used, adopting designs that facilitate recycling to promote the rcovery of packaging waste on disposal. 3) 包装的能源消耗低，面向加工的设计，面向运输的设计，降低加工和运输过程中的能源消耗；The energy consumption of packaging is low, with design for processing and transportation to reduce the energy consumption during these processes. 4) 包装的质量失效低，面向使用的设计，提高包装可靠性。The quality failure rate of packaging is low, with design for use to enhance the reliability of the packaging. 2可持续包装设计要求"Sustainable Packaging Design Requirements 2.1 环境属性 Environmental Attributes 遵守《化学品管理办法（节选）》。 Comply with the “Chemical Safety Regulation (Excerpt)”. 2.2 资源属性 Resource Attributes 2.2.1 可再生材料 The renewable material 在满足功能属性的前提下，优先采用可再生材料，如纸、纸板、生物基材料等。Under the premise of meeting functional attributes, priority should be given to the use of renewable materials, such as paper, cardboard, bio-based materials, etc. 2.2.2 回收材料 The recycled material 在满足功能属性的前提下，持续提高回收材料的使用比例。Under the premise of satisfying functional attributes, continuously increase the proportion of recycled materials used. 2.2.3 减量化设计 Minimal material design 在满足功能属性的前提下，基于仿真模拟设计，采用拓扑优化设计方案，降低材料用量。Under the premise of meeting functional attributes, based on simulation design, adopt Topology optimization design scheme to reduce the amount of material used. 2.2.4 易回收设计 Recyclable Design 在包装部件或组件上，按照GB/T18455、EN14311进行材料类别的标识，促进包装废弃后的，分类回收；On packaging components or assemblies, materials are identified by categories according to GB/T18455, EN14311 to facilitate the sorting and recycling after packaging waste; 逐步降低包装箱表面印刷油墨含量，降低回收过程中的废渣排放，提高纸箱废弃后的回收利用率；Gradually reduce the content of printing ink on the surface of packaging boxes to decrease the waste residue during the recycling process and increase the recycling rate after the cardboard boxes are discarded; 包装箱上逐步取消胶带、封箱钉等材料的应用，降低其回收时的复杂度，提高回收效率。The application of materials such as tape and box sealing nails on the packaging boxes is gradually eliminated to reduce the complexity of recycling and improve the recycling efficiency. 2.3 能源属性 Energy Attributes 2.3.1 面向加工的设计 Design for Processing 在满足包装功能属性的前提下，提高包装部件或组件的加工效率，如EPE衬垫，优先采用标准厚度、标准尺寸方案，降低加工复杂度，提高加工效率，降低加工过程中的能源消耗。Under the premise of meeting the packaging functional attributes, improve the processing efficiency of packaging components or assemblies, such as EPE, and prioritize the adoption of standard thickness and size schemes to reduce processing complexity, improve processing efficiency, and reduce energy consumption during process. 2.3.2 面向使用的设计 Design for Use 在满足功能属性的前提下，基于仿真模拟设计，降低包装部件或组件在液晶电视厚度和高度上的尺寸，提高液晶电视运输装箱量，降低运输过程中的能源消耗。Under the premise of satisfying functional attributes, based on simulation design, reduce the dimensions of packaging components or assemblies in terms of thickness and height for liquid crystal televisions, increase the transport packing volume of liquid crystal televisions, and reduce energy consumption during the transportation. 2.4 功能属性 Functional Attributes 为更好的保护液晶电视，包装方案应满足ISTA 3A /6A要求。To protect liquid crystal televisions, the packaging solution should meet the ISTA 3A /6A requirements The end.